Flexigas DS-CK15-15M-CC, Double Sleeved Contractor Kits: 15mm x 15m Coil with 2 x Flexigas to Copper Compression Fittings

Flexigas DS-CK15-15M-CC, Double Sleeved Contractor Kits: 15mm x 15m Coil with 2 x Flexigas to Copper Compression Fittings and yellow silicone tape DS-CK15-15M-CC

Flexigas DS can be used to pass through 100% of all installation scenarios, right out of the box.

You can use Flexigas DS for your complete installation or only where it is required by code to have a sleeve.

The Flexigas DS is a pipe-in-pipe solution that is suitable for installation through unvented areas, such as walls, lofts, under floorboards, cavities, risers or any area that is unventilated and requires a pipe-in-pipe solution that complies with BS 6891 and IGEM/ UP/2, 3 & 7 regulations, and is in slidable configuration with the inner CSST layer, meaning it is safe to install in any area that requires a sleeve or a duct.

Offering all the benefits of Flexigas, Flexigas DS can also be installed in one continuous length from the mains to the endpoint.

Also, just like Flexigas, Flexigas DS can be buried externally and in screed.

Flexigas is a flexible gas piping system manufactured to BS/EN15266 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar and certified in accordance with the BSI Kitemark certification scheme.

Flexigas CSST products use 316L marine grade stainless steel and typically save up to 75% of the time required for copper or steel installations.

Flexigas CSST can be bent by hand without the need for joints or hot works and can be passed through interior spaces easily using a continuous length of tubing.

The patented Flexigas fittings ensure a secure seal in a matter of seconds, without the need for any specialist tools.

No soldering, sealants or heavy crimping tools are needed for any of Flexigas CSST products.